sasadmin
Valitettavasti minulla ei ole mitään SAS levyt pelata tällä hetkellä. Mutta en todellakaan halua tietää, mitä "sasadmin sata_anarchy" ei 
*> Sasadmin
Käyttö: sasadmin dev_stats [<adapter_name>]
sasadmin dev_phy_disable <adapter_name>. <shelf_id>. <bay_id>
sasadmin dev_phy_reset <adapter_name>. <shelf_id>. <bay_id>
sasadmin dev_phy_clear_affiliation <adapter_name>. <shelf_id>. <bay_id>
sasadmin dev_power_cycle <adapter_name>. <shelf_id>. <bay_id>
sasadmin adapter_phy_enable <adapter_name> <phy_num>
sasadmin adapter_phy_disable <adapter_name> <phy_num>
sasadmin expander_phy_disable <adapter_name>. <shelf_id> <phy_num>
sasadmin expander_profile_byte {{-h <adapter_name>-s <shelf_id>} |-w <shelf_wwn>} [-o <byte offset>]-v <ctrl value>-l <module ID>
sasadmin expander_reset_count {{-h <adapter_name>-s <shelf_id>} |-w <shelf_wwn>}-l <module ID>
sasadmin expander_cli <adapter_name>. <shelf_id> [. <module ID>] "<komento>"
sasadmin expander_ctrl {{-h <adapter_name>-s <shelf_id>} |-w <shelf_wwn>} [-p <phy number>]-v <ctrl value>-l <module ID>
sasadmin expander_phy_reset <adapter_name>. <shelf_id> <phy_num>
sasadmin expander_phy_dongle_data <adapter_name>. <shelf_id> <phy_num>
sasadmin expander_phy_power_off <adapter_name>. <shelf_id> <phy_num>
sasadmin expander_phy_power_on <adapter_name>. <shelf_id> <phy_num>
sasadmin expander_phy_mux_reset <adapter_name>. <shelf_id> <phy_num>
sasadmin adapter_reset <adapter_name>
sasadmin adapter_offline <adapter_name>
sasadmin adapter_online <adapter_name>
sasadmin adapter_state [<adapter_name>]
sasadmin adapter_reservation_state <adapter_name>
sasadmin adapter_force_clear_reservations <adapter_name>
sasadmin adapter_force_rediscovery <adapter_name>
sasadmin laajennuskortti <adapter_name> [. <shelf_id>]
sasadmin expander_map [<adapter_name>]
sasadmin expander_phy_state [<adapter_name> [. <shelf_id>]]
sasadmin expander_routes <adapter_name>. <shelf_id>
sasadmin hylly [<adapter_name>]
sasadmin shelf_short [<adapter_name>]
sasadmin kanavat
sasadmin sata_anarchy <adapter_name>. <shelf_id>. <bay_id> <subcommand>
